Protect brick pavers without hiding their color
Brick Paver Sealing in Bartram Park, FL
Call (904) 849-6734 for a free brick paver sealing estimate in Bartram Park.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals brick pavers in Bartram Park, and how soon do I hear back?
A local contractor looks at brick pavers across Bartram Park, FL, and you will hear back within 1 business day, usually much sooner. The visit is free and brings no obligation, and you decide what happens next after you hear the price. To get started, call (904) 849-6734.
Brick is a different job from plain gray pavers. The color is part of the appeal, so the sealer has to protect without changing it more than you want. The first step is simple: a contractor identifies the brick, tests a small spot and explains the options in plain words. To set up that visit, book your free estimate.
Is my brick paver clay or concrete, and why does it change the sealer?
Many brick looking pavers are concrete made in a brick shape, and others are fired clay. The two take in water at different rates. Prosoco, a masonry products maker, says penetrating sealers soak in and let porous brick stay breathable, while film coatings sit on top and may trap vapor and peel. So the first question is the material. If you do not know it, say so when you call (904) 849-6734.
Unilock adds a second angle for concrete pavers: its own are designed for low maintenance, and sealing them is optional. That is why a contractor asks about the install, not only the surface. Photos of the original paperwork or a leftover paver help. To start that conversation, book your free estimate.
Will sealer darken my brick, and how do I choose a finish?
Some sealers change the look and some do not. Prosoco says certain products leave no visible change while others darken the brick or add a wet look, and it tells owners to test a small area first. Stallone's Pro Wash lists four finishes: wet look high gloss, wet look satin, natural matte and a penetrating sealer for stone. To pick one, call (904) 849-6734.
A test spot answers more than a brochure. Ask the contractor to coat one loose brick or a corner that is out of sight, wait for it to dry and judge the color at different times of day. A wet look deepens red and brown tones the most. To schedule a test, book your free estimate.
What is the white powder on my brick, and can it be sealed over?
It is usually efflorescence. Prosoco explains it needs salt, water and a porous material, and that the salts come from brick, mortar, cement, sand and even the ground. Sealing over it is a mistake, because surface salts get trapped. A contractor removes them first, in dry weather. To have a blooming wall or walk looked at, call (904) 849-6734.
Time helps new brick. Unilock says efflorescence fades in 2 to 3 months, up to a year, and that sealing should wait until it is gone. Prosoco warns that blooms that keep returning point to a water problem, like a sprinkler or a gap, which a coat cannot cure. Share what you see when you book your free estimate.
What does a brick paver sealing job include?
The steps look like other paver jobs, with extra care for porous material and salts. Stallone's Pro Wash describes cleaning, stripping failed sealer, sanding the joints and a flooded coat. For brick, add the material check and a test spot. Here is the process in short. To ask how it would run on yours, call (904) 849-6734.
1. Identify and test
Clay or concrete, old sealer or none, damp or dry. A hidden test spot shows what the coat will do to the color.
2. Remove salts and stains
Surface salts, algae and mildew come off first. Prosoco says remove surface efflorescence before any sealer goes on.
3. Dry completely
Prosoco says damp brick blocks a sealer and causes blotches, and Western Interlock says hidden moisture leaves cloudy spots.
4. Re-sand and seal
Joints get fresh sand, then the sealer goes on evenly, with any pooled product rolled out.
5. Cure and walk it
The contractor shows you the finish and says when feet, furniture and sprinklers can come back.
Can brick pavers already have a failing sealer on them?
Yes, and that changes the job. Prosoco says not to apply new sealer over a failing film unless it has been fully removed, and Stallone's Pro Wash strips peeling sealer before resealing for the same reason. Cloudy patches, flaking and a sticky feel are the usual signs. Your contractor can tell what is on the surface. To show someone, book your free estimate.
If a coat is only worn, a clean and recoat may be enough. Western Interlock says highly absorbent pavers may need two coats, and that pooled or left-behind sealer causes blotches that need fixing. Ask how many coats are planned and how the excess is removed. For a plan on your brick, call (904) 849-6734.
Does a Bartram Park association care about the brick finish?
Check your rules. MetroJacksonville reports that most Bartram Park housing is townhouses, apartments and condominiums and that every individual residential community is gated. Brick entry walks and courtyards are visible from the street. A penetrating or matte coat that leaves the color alone is the easiest to explain to a board. To get a product sheet with your estimate, call (904) 849-6734.
Are brick paver sealing visits available outside Bartram Park?
Yes. Every town below has its own page and the same brick service. Call (904) 849-6734 if your address sits between towns on the list.
What does brick paver sealing cost in Bartram Park?
No Jacksonville page read for this project lists a price for brick alone, so the table below is built from published pieces. Safe Touch lists $1.75 to $3.25 a square foot to clean, sand and seal. Stallone's Pro Wash lists cleaning from $0.22 and sealing from $1.90. A 350 square foot brick patio lands near $613 to $1,138 on the first range. For a number on your brick, book your free estimate.
Brick can run higher when salts, old film or sunken sections need work. Prosoco says most treatments last about 3 to 7 years, so a longer life can offset a higher first price. Ask for each extra as its own line. To compare a bid you hold, call (904) 849-6734.
Looking at another surface? Read about pool deck sealing, patio sealing or return to paver sealing in Bartram Park.
| Brick paver area | Cleaning only, from $0.22 a sq ft | Sealing only, from $1.90 a sq ft | Full clean, sand and seal |
|---|---|---|---|
| 150 sq ft | $33 | $285 | $262 to $488 |
| 350 sq ft | $77 | $665 | $612 to $1,138 |
| 600 sq ft | $132 | $1,140 | $1,050 to $1,950 |
| 900 sq ft | $198 | $1,710 | $1,575 to $2,925 |
No Jacksonville company page read in November 2026 lists a price for brick pavers alone. This table is built from the published pieces that do exist: cleaning from $0.22 and sealing from $1.90 a square foot from Stallone's Pro Wash, and $1.75 to $3.25 a square foot to clean, sand and seal from Safe Touch. Treat the numbers as a starting range for pavers, and expect a contractor to set the final figure after seeing the brick.
How often should brick pavers be resealed in Jacksonville weather?
Expect somewhere between 2 and 7 years. Stallone's Pro Wash says 2 to 5 years for professional sealer in Northeast Florida, and Prosoco says most treatments for brick last 3 to 7. PaverGuard says open driveways in Bartram Park may fade faster than shaded ones, so a sunny brick drive sits near the short end. To have a coat checked, call (904) 849-6734.
An annual look is cheap. Prosoco recommends yearly inspection, with sooner retreatment where sprinkler runoff keeps hitting the brick. If a head waters the pavers, move it. To book an inspection, book your free estimate.
What do sealed brick pavers look like near Bartram Park?
Frequently Asked Questions
Do I need to seal pavers in Florida?
Not every paver needs it, and many look better with it. Unilock says its own concrete pavers are designed to be low maintenance and that sealing is optional, while Safe Touch says summer storms wash sand from joints and sun fades color. If your brick is dull, stained or losing sand, a coat is worth pricing.
How long do paver sealers last?
Anywhere from 2 to 7 years, depending on the product. Stallone's Pro Wash says 2 to 5 years in Northeast Florida for professionally applied sealer. Prosoco, a masonry products maker, says most treatments for brick last about 3 to 7 years. Full sun and storms in Bartram Park push toward the shorter end.
Why is paver sealing so expensive?
The coat is the smaller part of the bill. Brick has to be cleaned, treated for salts and stains, dried and re-sanded first, and Safe Touch says sealing over dirt, wet pavers or empty joints is how jobs fail. Time and prep, not the bucket of sealer, are what you are paying for.
How much does it cost to have pavers cleaned and sealed?
Safe Touch publishes $1.75 to $3.25 a square foot to clean, sand and seal in Jacksonville. A 350 square foot brick patio comes to about $613 to $1,138. Brick alone has no published price, so ask the contractor to write what is included, and what is extra for stripping or repair.
Is my brick paver clay or concrete, and does it matter?
It matters for the product. Brick pavers can be fired clay or concrete made in a brick pattern, and the two soak up water differently. Prosoco says porous brick does better with a penetrating sealer and that film coatings may trap vapor and peel. Tell the contractor what you know about the install.
Will sealer make my brick look wet and darker?
Some do. Prosoco says certain sealers leave no visible change while others darken or add a wet look, and it advises testing a small area first. A wet look high gloss from Stallone's Pro Wash is the richest finish, and a natural matte stays close to the original color. Test a spot you can live with.
What is the white powder on my brick pavers?
It is usually efflorescence, a salt that rises through a porous material when water carries it up. Prosoco says it needs salt, water and a porous material, and that sealing should wait until the surface salts are removed. Unilock says it fades in 2 to 3 months and can take up to a year on new pavers.
How long should new brick pavers wait before sealing?
Unilock says 60 to 90 days after installation, and until any haze has gone. In Bartram Park, where much of the area was built since the 2004 interchange opened, some brick is still in this range. Sealing too early traps the salts that are still working their way out.
Can sealed brick still grow algae or mildew in the shade?
Yes. Sealer slows staining and helps the surface rinse clean, but damp shade still grows algae. Hydroseal lists mildew, leaf tannins and tree cover as patio problems in Jacksonville, and Safe Touch says afternoon storms feed algae. A shaded brick patio still needs a wash from time to time.
What other paver services pair well with brick sealing?
Brick is often one part of a bigger project. The pages below cover each service by itself. Call (904) 849-6734 to ask about a few at once.
Ready to protect the brick around your Bartram Park home?
Phone or send the short form, and a contractor replies within 1 business day, usually much sooner. No obligation.
Free, no obligation